Electrical Connections; Earthing Instructions - Femi CS 20-140 Manual De Instruccione

ELECTRICAL CONNECTIONS

Use 230 V 50 Hz alternate voltage equipped with a earthing conductor to supply your machine.
Ensure that the power supply corresponds to this voltage, that it is protected by a differential
and magnetothermal switch, and that the earthing system is efficient. If your machine does not
work when connected to a socket, check carefully the power supply features.
Use an extension cable in order to connect the machine to the power supply.

EARTHING INSTRUCTIONS

If the tool does not work properly or in case of short-circuit, the earthing system provides the
current with a less resistance path and reduces the risk of electric shock. This tool has a plug
to which a supply or extension cable must be connected, which in turn must be connected to a
socket correctly installed and earthed, in conformity with local standards and regulations. Be
sure that your earthing system is in good conditions and that your plug is protected by a
differential and magnetothermal switch.
Do not modify the plug of the machine. If it does not enter the socket, get a suitable plug installed
by a qualified person. If the earthing conductor is not correctly connected the risk of electric
shock can occur. The conductor which has the green insulating jacket (with or without a yellow
line) is the earthing conductor. If you must repair or change the supply cable, do not connect
the earthing conductor to a low tension terminal.
Consult a qualified electrician or a person in charge of the maintenance if you have not
understood or you have some doubts on the earthing instructions.
If the supply cable is damaged it must be changed by qualified people. Do not switch on the
machine if the supply cable is damaged.
This tool is provided with a plug which must connected to a suitable socket.
EN
ELECTRICAL CONNECTIONS
Socket with earthing
system
Earth conductor
Machine's plug
26