Maintenance And Care - Black and Decker Price Pfister Contempra 526 Serie Guia De Inicio Rapido

16
ON
16A
16 VALVE FUNCTION
By lifting the Lever Handle (16A) up, the valve will be activated allowing water to
fl ow. The water fl ow will increase by continuing to lift up the Lever Handle (16A).
By rotating the Lever Handle (16A) counterclockwise, the water temperature
will decreased to fully cold. By rotating the Lever Handle (16A) clockwise, the
water temperature will increased to fully hot.
17
17A
17 PULL-OUT OPERATION
The Pull-Out Hose (17A) can be pulled forward to spray water in any
direction.
18
18B
18 SPRAY OPERATION
To activate the spray mode, simply press the toggle button (18A) located on
back of the spray head (18B) while the faucet is in operation. The faucet will
always turn on in regular stream mode.
HOT COLD
16A
18A
ENGLISH

MAINTENANCE AND CARE

19
19 SPRAY HEAD REMOVAL
To prevent damage to the internal parts of your faucet from debris that may have
collected in the water lines, it will be necessary to fl ush the faucet. Flushing
requires the removal of the spray Head (19A). To remove the Spray Head (19A),
hold Pull-Out Hose (19B) and turn the Spray Head (19A) counterclockwise.
20
20B
20 FLUSHING
Lift the Valve Lever Handle (20A) up to the full on position. Run water for one
minute. Repeat in hot and cold positions. Reassemble the Spray Head (20B)
to the Pull-Out Hose (20C) by turning Spray Head (20B) clockwise.
Caution: do not over tighten spray head / pull-out hose.
5
19B
19A
20C
20A