Periodic Maintenance; Recommended Spare Parts - LAVOR Pro SPEED 45E Manual Del Usaurio

costly malfunctions.
Thermal breakers are installed to protect the suc-
tion motor ( Photo 7 - G ) wherever foreseen and
the brush motor ( Photo 7 - F ).
When one of these breakers trips automatically, the
disabled function can be reactivated by fully de-
pressing the button of the breaker.
When the thermal breakers trip, especially when
the machine is used during the first few weeks, it
Remove and wash the squeegee
Drain the recovery tank
Drain, rinse with clean water or sanifi-
cate the recovery tank
Charge the batteries
Check the acid level in the battery cells
(if batteries are not maintenance-free)
Check the wear of the squeegee rubber
blades
Remove brush and check for brush wear,
foreign bodies and wrapped belts
Verify the machine general conditions.
Open and clean the solution water filter
Verify that suction hose and conduct
are free from obstructions
Clean the brush plate, squeegee sup-
port and squeegee
Check the lifting/lowering of the squee-
gee.
Grease the moving parts.
Check the control cable for the opening of
the solution water tap.
Descale water hoses.

8.10 RECOMMENDED SPARE PARTS

You'll always be able to use your machine as effi-
ciently as possible by maintaining a stock of the
most common consumable materials and by sched-
uling routine and extraordinary maintenance. Con-
tact your dealer for a list of these spare parts.
8 - MAINTENANCE INFORMATIONS
might not be caused by actual machine malfunc-
tions. However, a specialized technician should
check the device if the relative breaker continues
to trip.

8.9 PERIODIC MAINTENANCE

For all the operations described herein, refer to the
instructions and detailed warnings in the relative
sections.
When After
needed every use
X
X
X
X X
X
X
X
X
49
Weekly Monthly
X
X
X
X
X
X
X