Replacing Defective Fuse - Medela Basic 30 Instrucciones De Uso

12 Replacing defective fuse

WARNINGS
Before replacing the fuse, pull the mains plug from Basic 30 out of the fixed mains socket.
1.
2.
3. Replace the defective fuse. Make sure that the technical
specifications are corresponding.
T 1.25 Al, 5 x 20, 230 – 240 V
T 3.15 AH, 6.3 x 32, 100 – 120 V
4.
5.
1.2 Switch off the Basic 30 by
pressing the on/off switch.
1.1 Disconnect the Basic 30
from the mains.
2.1 Open (turn left) the fuse
holder on the back of the
Basic 30.
4.1 Close (push back and turn
right) the fuse holder.
5.1 Reconnect the Basic 30 to
the mains again.
5.2 Switch on the Basic 30
again.
Replacing defective fuse
| 23