Playing A Record; Bluetooth Function - lauson CL603 Manual De Instrucciones

ENGLISH
PLAYING A RECORD
• Place the record of your choice on the turntable. If required, do not forget to
place the adaptor on the record spindle.
• Choose the desired playing speed using the speed selection switch between
33.3, 45 and 78rpm.
• Turn on the Rotary Power Switch (this know also controls volume)
• Release the tone arm lock.
• Raise the arm with your hand lightly.
• Place the stylus vertically over the first track of the record, the turntable will
start turning automatically.
• Put down the stylus slowly on to the record to play.
• When a record comes to the end, the turntable will stop automatically if the
auto-stop switch is in the ON position. If the switch is in the off position then it
will keep revolving until the tone arm is returned to the tone arm rest.
• Lift up the tone arm and put it on the rest when finished.
• Replace the protective cap on the stylus and close the tone arm lock.
• Turn off power at mains.
BLUETOOTH FUNCTION
Note: Lift up the tone arm and put it on the rest
• Press Bluetooth button
• Open your Bluetooth device, search "
• Connected if there was a remind sound.
• Select skip(+) or skip(-), play/pause key, and then you can choose favorite
songs.
• Under this function, turntable function will be stopped automatically
USB/SD FUNCTION
• Press USB button
• Insert your USB/SD equipment
• Kindly wait for a second and then, USB music will start
• Through this function, turntable function will not be available automatically.
ENCODING FUNCTION
• When you want to record the songs to USB/Bluetooth you must press and hold
USB KEY (3~5seconds) and then the speaker will display a "ding" sound, which
means that it stepped into the recording status
• When you want to exit the recording you can press and hold USB button on
stopping work record for the second time the speaker has "ding ding'' two
sounds, which means that it stepped Exit the recording status
to connect
"LAUSON CL603"
TURNTABLE
LAUSON
4