Perform CPR. Follow Feedback.
Using standard CPR technique, place the heel
of one hand directly onto the center of the
compression area of the attached CPRmeter.
Place your other hand on top of the first.
You should be able to see the display area
of the CPRmeter to look for feedback.
1. Provide chest compressions according to your CPR protocol.
2. When compressions are first detected by the CPRmeter, the display
changes to enlarged compression indicators, as shown:
3. Follow feedback provided by the indicators on the CPRmeter display. The
indicators are described in the following section.
WARNING: When the CPRmeter is used together with a defibrillator, make
sure to follow the defibrillator manufacturer's instructions. Stop compressions,
remove hands from the CPRmeter and remain clear of all patient contact
during defibrillation or when otherwise required, in accordance with a proper
defibrillation protocol.
CPRmeter_DFU_N2131_RevE.indd 11
11
19.03.12 14:54