ASSEMBLY INSTRUCTIONS
3. Insert two wooden dowels (CC) into the top
middle holes on both left front panel (E) and right
front panel (F). Carefully position the center
panel (G) into place between left front panel (E)
and right front panel (F). Secure each side with
one washer (BB) and one long bolt (AA).
Hardware Used
Long Bolt
AA
Washer
BB
Wooden Dowel
CC
4. Insert two wooden dowels (CC) into the top
outer holes on both left wall (C) and right wall
(D). Attach top (A), securing from underneath
with seven washers (BB) and seven long bolts
(AA).
Hardware Used
Long Bolt
AA
Washer
BB
Wooden Dowel
CC
5. From behind the assembly, remove the
preassembled insert brackets from the opening area.
Save brackets and screws for future use.
(CONT'D)
x 2
x 2
x 2
x 7
x 7
x 4
7
3
G
CC
1
AA
BB
4
A
1
5
2
2
CC
BB
AA
2
2