Philips FC8820 Manual Del Usaurio página 15

Using the cleaning time buttons
- Press the maximum cleaning time button to make the robot clean in
auto cleaning mode until its rechargeable battery runs low.
When the robot has finished cleaning, it returns to the docking station
automatically if it started from the docking station. If the robot started
from another point in the room, press the docking button to send it
back to the docking station.
- The other cleaning time buttons allow you to let the robot operate for
60, 45 and 30 minutes respectively. When the cleaning time is finished,
the robot automatically returns to the docking station when it started
from the docking station. If the robot started from another point in the
room, press the docking button to send it back to the docking station.
Using cleaning programs
Setting clock time and day
If you want to use cleaning programs, you have to set the clock time and
the day of the week on the display of the docking station first. For the
pictures that belong to the steps below, see the fold-out pages at the back.
1 Press the set button. The set mode indicator and the clock time
indicator start flashing.
2 Press the select button once. The hour indication starts flashing.
3 Use the + and - buttons on the remote control to set the hour.
The set hour appears on the display.
4 Press the select button to confirm the hour set. The minutes
indication starts flashing.
5 Use the + and - buttons on the remote control to set the minutes.
The set minutes appear on the display.
6 Press the select button to confirm the minutes set. The indication
'Su' for Sunday starts flashing.
7 Use the + and - buttons on the remote control to set the current
day of the week.
8 Press the select button to confirm the day of the week.
9 Press the set button to confirm the clock time and day of the week
setting. Both the set mode indicator and the clock time indicator
stop flashing and turn solid.
ENGLISH
15