Programming Cleaning Times; Fan Speed Buttons - Philips FC8820 Manual Del Usaurio

ENGLISH
16
Program
Cleaning every day
Cleaning on weekdays
Cleaning on 2 consecutive days
Cleaning 1 day a week

Programming cleaning times

If you have set the time and the day of the week on the display of the
docking station, you can program cleaning times for your robot. For the
pictures that belong to the steps below, see the fold-out pages at the back.
The programming options available are:
1 Press the set button. The set mode indicator and the cleaning
program indicator start flashing.
2 Press the select button once. The hour indication starts flashing.
3 Use the + and - buttons on the remote control to set the hour.
The set hour appears on the display.
4 Press the select button to confirm the hour set. The minutes
indication starts flashing.
5 Use the + and - buttons on the remote control to set the minutes.
The set minutes appear on the display.
6 Press the select button to confirm the minutes set. The indication
'Su' for Sunday starts flashing.
7 Use the + and - buttons on the remote control to toggle between
cleaning programs (see the table above for the programming options
available).
8 Press the select button to confirm the program selected.
9 Press the set button to confirm the programming. Both the set mode
indicator and the cleaning program indicator stop flashing and turn solid.
10 When you have set a cleaning program, the display shows the cleaning
program indicator and the day or days selected. If you leave the robot on
standby and its rechargeable battery is fully charged, it will start cleaning
at the programmed time on the programmed day or days.

Fan speed buttons

You can use the fan speed buttons to increase the fan speed to turbo or to
switch off the fan. The default setting is normal fan speed.
1 Turbo fan speed increases the suction power of the robot.
2 You can switch off the fan by pressing this button.
3 Press this button for normal fan speed.
Indication on display
All day indications are on
Mo to Fri indications are on
Indications of 2 days are on, e.g. Fri and Sa
Indication of selected day is on