Bissell CROSSWAVE 1785 Serie Manual Del Usaurio página 12

Maintenance:
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1
Place unit on self-cleaning
storage tray.
4
Recline the machine while in storage
tray. Allow the machine to run for 10-15
seconds until all water is picked up.
Repeat as needed.
6
Pull brush roll out by grabbing the
brush roll tab and pulling upward.
12
www.BISSELL.com
Easy Clean Storage Tray
2
Pour water to the MAX
line of the self-cleaning
storage tray.
5
Grasp brush roll window at the front of
the window and pull upward to remove.
7
Place the brush roll upright in the Brush
Roll Drying Tray to dry.
3
Turn the machine ON by
pressing the Hard Floor
button.