Denver CRL-310 Instrucciones De Uso página 12

Note: When using the NAP alarm the wake up light function is
inactive.
NATURAL SOUND
1. In standby mode, tap the unit ON-OFF button (14) or the remote
control ON-OFF button (1) to turn the unit 'On'.
2. Press the unit button (9) or the remote control button (2) to
switch to natural sound mode.
3. Use the main unit buttons (10) and (11) or the remote control
button (15) to select the desired natural sound.
DAYLIGHT SAVING TIME (DST) MODE
If daylight saving time (DST) is available in the summer time in your
State, you may use this option to adjust to the correct time easily.
1. In standby mode, press and hold the unit DST button (11) or the
remote control button (11) for 2 seconds to advance the
displayed time by one hour.
2. To cancel DST mode, repeat the above operation.
AUX IN JACK
(Cable not included)
1. If required, use a suitable adapter (not included). Connect the
external device as follows :
• With a 3.5 mm stereo jack plug to the AUX IN socket (15).
2. Turn the device on using the unit button (14) or the remote
control button (1). Press the unit button (9) or the remote control
button (2) to switch to AUX IN mode. AUX IN appears in the
display.
3. Start the playback of your audio source. Listen to the sound
playback via the speaker. You can adjust the volume using the
unit buttons (11/12) or the remote control button (9/14).
4. For the further procedure, please refer to the user manual of the
external audio source.
NOTE:
If possible, adjust the volume of the external unit to a comfortable
level.
Stop AUX IN operation
Disconnect the cable from the AUX IN jack. Press the unit on/off
button (14) or the remote control button (1) to turn the unit off.
ENG-11