Denver CRL-310 Instrucciones De Uso página 6

Display on/off function
• In standby mode, press and hold unit SOURCE button (9) or the
remote control SOURCE button (2) for 3 seconds. "ON" appears
on the display (2).
• After 15 seconds, the display (2) turns off.
• Press any button to turn the display (2) on for another 15
seconds.
• To deactivate the display on/off function, press and hold unit
SOURCE button (9) or the remote control SOURCE button (2)
for 3 seconds. "OFF" appears on the display (2).
Reading light function
1. Press the unit button (3) or the remote control button (4) to turn
on the function.
2. Use the unit button (5) or the remote control button (17) to
increase the brightness. Use the unit button (4) or the remote
control button (18) to reduce the brightness.
3. In order to turn off the function, press the button again.
Mood light
1. Press the unit button (6) or the remote control button (5) to turn
on the mood light. The light will alternate in different colors.
2. Press and hold the unit button (6) for about 3 seconds or Press
the remote control button (16) to stop or start the mood light
color changing.
3. In order to turn off the mood light, press the unit button (6) or the
remote control button (5) again.
Toggle temperature display between °C (Celsius) and °F
(Fahrenheit)
1. Press the device to standby mode using the unit button (14) or
the remote control button (1).
2. Press the unit button (7) or the remote control button (6) to
display the temperature.
3. While the temperature is displayed, press the unit button (10) or
the remote control button (6) for about 3 seconds to switch
between °C and °F.
RADIO TUNING
1. In standby mode, Press the unit on/off button (14) or the remote
control on/off button (1) to turn the unit 'On'.
ENG-5