Kenmore CROSSOVER MAX 116.10325 Manual De Uso Y Cuidado página 20

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BELT CHANGING
Replace
belt whenever
a burning
rubber
smell caused
by excessive
slippage
OCCURS,
1. Lay vacuum
cleaner
on floor
with
the
bottom
up and nozzle
flat.
2. Release
lower plate by rotating
the
lower plate
latches
to the UNLOCK
position.
Lift off lower
plate.
Lower
PJafe
_
CAUTION
3. Remove
agitator
by carefully
lifting
out.
4.
Remove worn
or broken
belt.
5. Clean
agitator
(see AGITATOR,
CLEANING
p. 21).
6.
Loop new belt around motor
shaft and
agitator.
7. Reinstall
agitator
back
into nozzle
by
placing
end caps into grooves.
End
Slot
Belt
Agitator
8. Reinstall
lower plate by aligning tabs
on front
edge of lower plate with slots in
the nozzle
and rotating
to installed
position.
Tabs
Slots
9.
Press lower plate onto nozzle
and
secure by rotating
the lower
plate latches
to the LOCI(
position.
Latches
- 20 -

Publicidad

Tabla de contenido
loading

Tabla de contenido