Kenmore CROSSOVER MAX 116.10325 Manual De Uso Y Cuidado página 15

EMPTYING DUST CUP
WARNING
Always unplug power cord from
electrical outlet before performing
any service on vacuum cleaner.
TO REMOVE DUST CUP
1. Lift dust cup handle located at the top
of the dust cup.
Handle
2. Pull the dust cup handle up and lift dust
cup up and out of the vacuum cleaner.
3. Remove any
clogs that might
be located in the
suction port or
filter port area.
Port
Port
TO EMPTY DUST CUP
1. Raise dust cup handle to the vertical
position.
2. Hold dust cup over a trash container.
3. Press the dust
cup latch Cup
downward to Handle
release the door.
The door wilt
swing open and \
the debris will
\
fall into the
trash container.
4. Shake the
dust cup to
release any
debris that
might hang in
the pre-fiiter.
Cup
Latch
5. After the dust cup
is empty of debris,
firmly close the
door. Make sure you
hear a "click" sound
to indicate that the
door is fully latched.
= 15 =