Functional Components - Dreve Drufosmart D3200 Instrucciones De Trabajo

Drufosmart
16. Plates and labels have to be main-
tained in a well legible condition and
must not be removed.
17. Before cleaning and maintenance
of the unit or the exchange of parts the
plug has to be disconnected.
18. The opening of the unit and repairs
are only to be carried out by accordingly
trained experts.
19. Only those appliances and spare
parts may be used which are released by
the manufacturer. We are not responsi-
5. Initiation
Before initiation make sure that the volt-
age indicated on the type plate meets
the voltage of the power source.
Connect the unit to an air compressor.
Push the pressure hose (included in the
delivery) into the compressed air con-
nection (9) until it is locked in place. The
hose does not need any further fasten-
ing. To release the pressure hose push
the blue ring upwards and draw the hose
off by pulling downwards. Assemble the
fast coupling at the other end of the tube
and connect it with the pressure line.
The pressure of the compressed
air line must not exceed 10 bars.
Put the power cord into the female
connector (33) and create a connec-
tion with the Euro/USA plug.
26
ble for damages caused by the use of
foreign parts.
20. Arbitrary rebuilding or modifica-
tions are not permitted due to safety
reasons.
21. The required operation and main-
tenance conditions mentioned in these
working instructions are to be complied
with imperatively. When working with
the Drufosmart the general accident
prevention regulations have to be
observed.
Important: Before the first initiation
please read the working instructions
thoroughly. In case of comprehen-
sion problems contact your responsi-
ble dealer or Dreve Dentamid GmbH,
if necessary.
Scope of delivery
1 Drufosmart
1 drawer for granules
1 insert bowl and nub plate
1 tension ring with exhaust valve
1 base range of blanks
1 power cord
1 air connection hose
incl. hose clamps and fast coupling
1 working instructions in 6 languages
1 information folder thermoforming foils

6. Functional components

34
9
13
10
11
No. Description
5 Heating handle
6 Nub plate and insert bowl
7 Drawer for granules
9 Compressed air supply
10 Handle plate reception
11 Plate reception
12 Ventilation valve
43
13 Tension ring
20 Heating
27 Display
33 Mains supply / fuse carrier
34 Activation lever
43 Main switch
44 Turnable pressure controller
27
44
20
5
12
6
7
33
9
27