Ferm SSM1005 Traducción Del Manual Original página 9

• Allow the blade to drop down slightly and push it forward, in order to loosen it from the lower holder.
Basic scroll saw operations and tips
• There is a learning curve for each person who wants to use this saw. During that period of time it is
expected that some blades will break until you learn how to use the saw and receive the greatest
benefit from the blades.
• Blades wear faster when:
• cutting plywood, which is very abrasive;
• when sawing wood which is thicker than the blade stroke;
• when sawing hardwood;
• when side pressure is placed on the blade
• The saw blade saws only during the downward stroke.
• Using both hands, slowly and with minimum pressure push the workpiece across the table towards
the saw blade. This will prevent the blade from breaking or twisting.
• For optimal results, the saw blade must be sharp.
• Use the proper saw blade. The selection of the saw-blade depends on the thickness of the wood and
the cut you would like to achieve. Keep the following in mind as a general rule: The thinner and
harder the wood, the finer the teeth of the saw blade. Use a small blade to saw sharp curves.
5. MAINTENANCE
Always disconnect the machine from the mains before carrying out any maintenance work.
The machine is designed to function faultlessly for a long period and with a minimum of maintenance.
Extend its lifespan by regularly cleaning the machine and treating it correctly.
Cleaning
Regularly clean the machine with a soft cloth, preferably after each use. Keep the ventilator slot free of
dust and other deposits. Remove any tenacious deposits with a soft cloth moistened with soap. Do not
use solvents (petrol, alcohol, ammonia, etc.) as they will damage the plastic parts.
Lubrication
The machine does not need lubricating.
Faults
If a fault arises (due to e.g. element wear), contact the service address listed on the warranty card.
Environment
To prevent damage during transport, the appliance is delivered in a solid packaging which consists
largely of reusable material. Therefore please make use of options for recycling the packaging.
Damaged and/or disposed of electrical or electronic devices must be dropped off at recycling
stations intended for that purpose.
Warranty
Read the warranty conditions on the separately supplied warranty card.
Ferm
EN
9