Fixture Test; Reset Functions - Briteq BTX-FALCON Manual De Instrucciones

ENGLISH
Temperature Unit
The display can show temperature either in °C (Celsius) or °F (Fahrenheit)
°C: Temperature is shown in Celsius.
°F: Temperature is shown in Fahrenheit.
 Select "Temperature Unit" and press ENTER.
 Use DOWN / UP buttons to select °C or °F.
 Press the ENTER button to save.
To return to a previous menu, press the MENU button.
Display Warning
You can choose if the projector warns you that an error occurred.
No: display only shows the error discretely
Yes: the display starts blinking while the error is shown on the display.
 Select "Display Warning" and press ENTER.
 Use DOWN / UP buttons to select Yes or No.
 Press the ENTER button to save.
To return to a previous menu, press the MENU button.

Fixture Test

This submenu contains some features to quickly test the unit without the need for a controller.
 Press the MENU button and select the "Fixture Test" submenu.
Auto Test
The uit performs an automatic test where all features are shown.
 Select "Auto Test" and press ENTER.
 The projector starts the automatic test function and returns to normal operation after the test.
To return to a previous menu or stop the test, press the MENU button.
Manual Test
You can check all functions one by one without the need for a DMX-controller.
 Select "Manual Test" and press ENTER.
 The display shows a list with all functions that can be tested.
 Use DOWN / UP buttons to browse the list and press ENTER to select a function.
 Use DOWN / UP buttons to adapt the values: 000 to 255.
 Press MENU to return to the list and choose another function to test.
To stop the test, press the MENU button until you're in the main menu.
Fixture Information
This submenu contains some useful information for servicing.
 Press the MENU button and select the "Fixture Information" submenu.
 The display shows the following information:
 "Fixture use Hour": shows how many hours the fixture was in use. (reset not possible)
 "Light Use Hour": shows how many hours the led engine was switched on (can be reset to zero)
 "Firmware Version": press MENU to show the software version for the different processors.
To return, press the MENU button until you're in the main menu.

Reset Functions

This submenu is used to reset the unit or parts of the unit.
 Press the MENU button and select the "Reset Functions" submenu.
 The display shows a list with different functions that can be rest: Pan/tilt, Color, Gobo, ..., All.
 Use DOWN / UP buttons to browse the list and press ENTER to select a function.
 Use DOWN / UP buttons to confirm your choice: Yes or No.
 Press MENU to return to the list and choose another function.
To return, press the MENU button until you're in the main menu.

Notice an alternative shortcut for a complete reset of the projector: press the MENU & ENTER
buttons together for 3seconds.
BRITEQ
®
8/79
OPERATION MANUAL
BTX-FALCON