ENGLISH
FIXED GOBOS (GOBO WHEEL2 – CHANNEL 12
Gobo wheel 2 contains 8 standard fixed gobos (gobo size: 31,4mm – image size: 22,0mm)
These gobos can be replace by your own custom gobos, only metal gobos can be used.
Replacing the gobos:
Switch the projector off, unplug the power cable and wait until the unit is cool.
Remove the plastic cover of the head using a Phillips screwdriver (PH2)
Locate the gobo wheel with fixed gobos.
The gobos are fixed directly in the gobo wheel.
Remove the gobo gently and replace it by a new one.
Put the plastic cover of the head back in place using a Phillips screwdriver (PH2)
Done.
MAINTENANCE
Make sure the area below the installation place is free from unwanted persons during servicing.
Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
In order to protect the device from overheat the cooling fans and ventilation openings should be cleaned
monthly.
The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics.
Clean with a soft cloth using normal glass cleaning products.
Always dry the parts carefully.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
BRITEQ
®
14/79
OPERATION MANUAL
BTX-FALCON