Sealed Star™ Burners; Star™ Burner Caps - Thermador SGS Serie Manual Del Usaurio

Sealed STAR™ Burners
STAR™ Burner Caps
2. Left rear surface burner (12,000 BTUs) - XLO feature on SGSX model only
3. Right rear surface burner (8,000 BTUs)
4. Right front surface burner (12,000 BTUs)
5. Center surface burner (15,000 BTUs)
6. Burner "On" Indicator Light
7. Serial Number/Data Plate Location (right front underneath)
2
1 1
1. Left front surface burner (8,000 BTUs) - XLO feature on SGSX model only
2. Left rear surface burner (12,000 BTUs) - XLO feature on SGSX model only
3. Right rear surface burner (8,000 BTUs)
4. Right front surface burner (12,000 BTUs)
5. Center left surface burner (15,000 BTUs)
6. Center right surface burner (15,000 BTUs)
7. Burner "On" Indicator Light
8. Serial Number/Data Plate Location (right front underneath)
Your new cooktop has sealed STAR™ gas burners. There are no burner parts
under the cooktop to clean, disassemble or adjust. Your cooktop has three differ-
ent burner sizes; small, medium and large. Match the pan to the burner size.
The burner cap is porcelainized steel. If the burner cap is not placed correctly, the
burner may not light or the flame may not burn completely or correctly.
5 6 3
2 5 7 6 3 4
Figure 3:
8
4
Model SGS456/SGSX456
Burners Caps
Figure 4:
English 5