After-Sales Service And Application Service - Bosch Professional GKS 235 Manual Original

OBJ_BUCH-344-006.book Page 33 Monday, January 23, 2017 8:52 AM
– Adjust the desired cutting depth and the bevel angle. Ob-
serve the marks on the guide-rail adapter 31 for preadjust-
ment of the various bevel angles; see figure F.
– Align the circular saw with guide-rail adapter in such a man-
ner that the teeth of the saw blade 20 face against the rub-
ber lip. The position of the saw blade 20 depends on the
selected cutting angle. Do not saw into the guide rail.
0 1-45
– Tighten wing bolt 8 to lock the position of the guide-rail
adapter.
– Remove the circular saw with the premounted guide-rail
adapter 31 from the guide rail 28.
– Align the guide rail 28 on the workpiece in such a manner
that the rubber lip lies exactly alongside the cutting edge.
– The guide rail 28 must not extend beyond the face side
of the workpiece where the cut is to be started.
– Fasten the guide rail 28 with suitable clamping devices,
e. g., screw clamps, on the workpiece. Set the circular saw
with the premounted guide-rail adapter 31 on to the guide
rail.
– Switch the machine on and guide it in the cutting direction
applying moderate and steady feed.
Two guide rails can be connected using the connection piece
29. Clamping is carried out with the four screws located in the
connection piece.
Maintenance and Service
Maintenance and Cleaning
 Before any work on the machine itself, pull the mains
plug.
 For safe and proper working, always keep the machine
and ventilation slots clean.
The retracting blade guard must always be able to move freely
and retract automatically. Therefore, always keep the area
around the retracting blade guard clean. Remove dust and
chips by blowing out with compressed air or with a brush.
Saw blades that are not coated can be protected against cor-
rosion with a thin coat of acid-free oil. Before use, the oil must
be removed again, otherwise the wood will become soiled.
Resin and glue residue on the saw blade produces poor cuts.
Therefore, clean the saw blade immediately after use.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Bosch Power Tools

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
People's Republic of China
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 4008268484
Fax: (0571) 87774502
E-Mail: contact.ptcn@cn.bosch.com
www.bosch-pt.com.cn
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King's Road
North Point, Hong Kong
Customer Service Hotline: +852 2101 0235
Fax: +852 2590 9762
E-Mail: info@hk.bosch.com
www.bosch-pt.com.hk
Indonesia
PT Robert Bosch
th
Palma Tower 10 Floor
Jl. RA Kartini II-S Kaveling 6 Sek II
Pondok Pinang, Kebayoran Lama
Jakarta Selatan 12310
Indonesia
Tel.: (021) 3005 5800
Fax: (021) 3005 5801
E-Mail: boschpowertools@id.bosch.com
www.bosch-pt.co.id
Philippines
Robert Bosch, Inc.
28th Floor Fort Legend Towers,
3rd Avenue corner 31st Street,
Fort Bonifacio Global City,
1634 Taguig City, Philippines
Tel.: (02) 8703871
Fax: (02) 8703870
matheus.contiero@ph.bosch.com
www.bosch-pt.com.ph
English | 33
1 609 92A 35X | (23.1.17)