Product Description And Specifications - Bosch Professional GKS 235 Manual Original

OBJ_BUCH-344-006.book Page 8 Monday, January 23, 2017 8:52 AM
8 | English (US)
 Do not work overhead with the saw. In this manner, you
do not have sufficient control over the power tool.
 Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
 Do not operate the power tool stationary. It is not de-
signed for operation with a saw table.
 Do not use high speed steel (HSS) saw blades. Such saw
blades can easily break.
 Do not saw ferrous metals. Red hot chips can ignite the
dust extraction.
 When working with the power tool, always hold it firm-
ly with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the power tool has come to a com-
plete stop before placing it down. The tool insert can jam
and lead to loss of control over the power tool.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended use
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece. With suitable saw
blades, thin-walled non-ferrous metals, e. g., profiles, can al-
so be sawed.
Working ferrous metals is not permitted.
Technical Data
Circular Saw
Article number
Rated power input
No-load speed
Rotational speed under load (max.)
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
These values apply for a rated voltage [U] of 230 V. These values may vary if the tool is used with different voltages or if the tool is a country-specific
model.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavorable mains system conditions.
Malfunctions are not to be expected for system impedances below 0.25 ohm.
1 609 92A 35X | (23.1.17)
Product Features
The numbering of the product features refers to the illustra-
tion of the power tool on the graphics page.
1 Blade guard
2 Lock-on button for On/Off switch
3 On/Off switch
4 Auxiliary handle (insulated grip)
5 Spindle lock button
6 Scale for miter angle
7 Wing bolt for bevel-angle preselection
8 Wing bolt for parallel guide
9 Cutting mark, 45°
10 Cutting mark, 0°
11 Parallel guide
12 Retracting blade guard
13 Lever for retracting blade guard
14 Base plate
15 Wing bolt for bevel-angle preselection
16 Sawdust ejector
17 Hex key
18 Clamping bolt with washer
19 Clamping flange
20 Saw blade*
21 Mounting flange
22 Saw spindle
23 Fastening screw for extraction adapter*
24 Extraction adapter*
25 Clamping lever for cutting-depth preselection
26 Cutting-depth scale
27 Set of screw clamps*
28 Guide rail*
29 Connection piece*
30 Vacuum hose*
31 Guide-rail adapter*
32 Handle (insulated grip)
*The accessories illustrated or described are not included as stan-
dard delivery.
GKS 235
3 601 E7A 0..
W 2100
rpm 5000
rpm 3500
mm 85
mm 65
GKS 235
3 601 E7A 0..
2100
5000
3500
85
65
Bosch Power Tools