Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GCM 12 GDL Professional Manual Original

– Make sure that the depth stop (30) is pressed all the way
in and that the adjusting screw (29) fits through the re-
cess without touching the depth stop when moving the
glide arm.
– Guide the glide arm downwards until you can press the
transport safety lock (31) all the way in
– Slide the saw table extensions (7) all the way in.
– Set the bevel angle to 0° and tighten the clamping
handle (13).
– Turn the saw table (38) as far as possible to the left and
tighten the locking knob (11).
– Wind up the mains cable and tie it together with the hook-
and-loop strap (75).
– Remove all accessories that cannot be securely fitted to
the power tool.
– If possible, transport unused saw blades in an enclosed
container.
– For transport, hold the power tool by the recessed
handles (16) on either side of the saw table.
When transporting the power tool, only use the trans-
u
port fixtures. Never carry the power tool by the pro-
tective devices, the glide arm or the handle.

Maintenance and Service

Maintenance and cleaning

Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
The retracting blade guard must always be able to move
freely and retract automatically. It is therefore important to
keep the area around the retracting blade guard clean at all
times.
Always remove dust and chips after working by blowing out
with compressed air or using a brush.
– Clean the guide roller (20) and the glide arm (28) regu-
larly.
Accessories
Screw clamp
Insert plates
Dust bag
Dust extraction adapter
GTA 2500 W saw stand
GTA 3800 saw stand
GAS 35 M AFC wood dust extractor
Saw blades for wood and fibreboard, panels and strips
Bosch Power Tools
305 x 30 mm saw blade, 60 teeth
Saw blades for plastic and non-ferrous metals
305 x 30 mm saw blade, 96 teeth
305 x 30 mm saw blade, 96 teeth
Saw blades for all types of laminate flooring
305 x 30 mm saw blade, 96 teeth

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
Article number
E-Mail: boschservicecentre@bosch.com
1 609 B06 203
Ireland
1 609 B04 470
Origo Ltd.
1 609 B05 010
Unit 23 Magna Drive
2 607 001 977
Magna Business Park
City West
0 601 B12 100
Dublin 24
0 601 B24 000
Tel. Service: (01) 4666700
0 601 9C3 100
Fax: (01) 4666888
Autogoods "130"
English | 43
Article number
2 608 641 768
2 608 642 099
2 608 640 453
2 608 642 137
1 609 92A 5RR | (02.07.2020)