Krups EA815 Manual De Instrucciones página 34

TURNING OFF YOUR APPLIANCE
You can turn off your appliance at any time. When stopped, the machine emits a double beep and OFF is dis-
played on the screen. The appliance has registered your request and will stop as soon as possible.
SETTINGS
All of the following options allow you to run the selected programs:
oz ml
Measuring water hardness
It is advisable to adjust the appliance according to the hardness of the water used. To check the water hard-
ness, use the stick supplied with your machine or contact your local water authority.
Degree of
hardness
° dH
° e
° f
Appliance
settings
Installing the filter (Claris - Aqua Filter System cartridge) fig.32
Note : To correctly install your cartridge, ensure that you follow the installation procedure each time you replace
it.
Fig.33. A mechanism which memorizes the month in which the cartridge was changed and replaced (after a
maximum of 2 months): set the date using the cartridge cursor. Fit the cartridge in the tank fig.34. In the main-
tenance and settings menu
Using the navigation button
start button start to flash.
32
You can set your water hardness between 0 and 4.
See "Measuring water hardness" (below) by pressing the + or –
.
buttons
You can program automatic rinsing each time the appliance is
turned on by pressing the
You can choose the period after which your appliance will turn
off automatically (between 15 and 120 minutes by pressing the
buttons).
You can adjust the temperature of your coffee to three different
levels by pressing the
You can choose between oz and ml by pressing the + or –
.
buttons
Return to coffee types menu.
Classe 0 Classe 1
Very soft Soft
< 3° > 4°
< 3.75° > 5°
< 5.4° > 7.2°
0 1
, the function indicator
, select the filter cartridge installation symbol
buttons and selecting ON.
buttons.
Classe 2
Average hardness
> 7°
> 8.75°
> 12.6°
2
is located above the maintenance button
Classe 3 Classe 4
Hard Very hard
> 14° > 21°
> 17.5° > 26.25°
> 25.2° > 37.8°
3 4
. The symbols and the
.