Use And Maintenance - Krups EA815 Manual De Instrucciones

Ocultar thumbs Ver también para EA815:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

For the safety of your appliance, remove the plug in the event of a thunderstorm. Do not pull the power lead
to remove the plug.
Remove the plug immediately if you notice any problem during operation or if there is a problem during
brewing.
Disconnect the appliance if you are not going to use it over a long period of time and when cleaning.
Do not use the appliance if the power cord or the appliance itself is damaged. If the power cord or plug is
damaged, the power cord must be replaced by an approved KRUPS service center.
Do not leave the power cord overhanging a table or work surface. Do not allow your hands or the power
cord to touch hot parts of the appliance.
The power cord must never be close to or in contact with a source of heat or be allowed to rest on sharp
edges.
The use of multiple plugs or extension leads is not recommended. Any error in connection will invalidate the
warranty.
Appliance
With the exception of cleaning and descaling according to the appliance instructions, any other maintenance
on the appliance must be performed by an approved KRUPS service center.
For your own safety, only use approved KRUPS accessories and spare parts since these are suitable for
your appliance.
Disconnect the appliance when you leave the room or house for a long period of time.
Never open the appliance.
!
Caution! risk of death due to electrical current! Any unauthorized opening of the appliance will invalidate
the warranty. Do not use your appliance if it is not working properly or if it has been damaged. In this
event, it is recommended that you get the appliance examined by an approved KRUPS service center
(refer to the list in the KRUPS service booklet).
For safety and accreditation reasons, any transformation or modification of the appliance, performed
individually, is forbidden, as only tested appliances are accredited and the manufacturer will refuse all liability
in the event of damage.
For safety reasons, while producing steam for making a cappuccino, heating milk or heating water, do no
put your hands under the steam nozzle or the super cappuccino accessory, or under the coffee nozzle while
making coffee.
The steam nozzle can be very hot, do not touch it during or right after use.
To avoid dirty water overflowing onto your counter top or running the risk of burning yourself, remember to
put the drip tray in place and make sure you protect your counter top during the descaling cycles, particularly
if it is made of marble, stone or wood.
Never put ground coffee into the coffee bean hopper.
Do not put water in the coffee bean hopper.

Use and maintenance

In the event of a malfunction or poor working condition, check the appliance and try to resolve the problem
(see p. 33: Problems and corrective measures) or get the appliance repaired at an approved KRUPS service
center if the malfunction persists.
Always refer to the instructions for descaling/cleaning the appliance. Always unplug the machine before
starting any maintenance operation.
23

Publicidad

Tabla de contenido
loading

Tabla de contenido