Krups EA815 Manual De Instrucciones página 36

Ocultar thumbs Ver también para EA815:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PROBLEM
MALFUNCTION
The coffee dispenses too slowly.
The water/steam is not
dispensing normally from the
steam nozzle.
The coffee fineness knob is
difficult to turn.
The espresso or coffee is not hot
enough.
The coffee is too lightly colored or
too weak.
The appliance is not producing
coffee.
Why can I not run descaling/why
does my machine not request a
descaling cycle?
A power failure occurs during a
cycle.
The appliance is working but
does not dispense any liquid.
Danger : Only a qualified technician is authorized to carry out repairs on electrical wiring and carry out
work on the electrical grid. If you do not follow these instructions, you risk death by electrocution! Do not
use an appliance that is visibly damaged!
34
CORRECTIVE ACTION
Turn the coffee fineness knob to the right to make the grounds coarser (this could
also depend on the type of coffee used).
Run one or several rinsing cycles.
Run a machine clean (see "Cleaning program").
Change the Claris Aqua Filter System cartridge (see "Installing the filter").
At the beginning or end of making a drink, the steam nozzle may drip slightly.
Only change the grinder setting when it is running.
Increase the coffee temperature in the Maintenance and settings menu
the cup by rinsing it with hot water before making the drink..
Avoid using oily, caramelized or flavored coffee. Check that the coffee bean
container has coffee in it and that is it dispensing correctly.
Decrease the drink volume, increase the drink strength.
Turn the coffee fineness knob to the left to make the grounds finer.
Make the drink in two cycles by using the 2 cups function.
A problem has been detected during preparation of the drink.
The appliance has restarted automatically and is ready for a new cycle.
The machine only requests a descaling cycle once it has made a certain number of
drinks using steam.
The appliance is automatically restarted when power is switched back on.
Check that the water tank is in place, and that the cord is not stuck between the
body of the appliance and the water tank.
. Warm

Publicidad

Tabla de contenido
loading

Tabla de contenido