Intended Use; Before You Start; Positioning The Shredder Safely - Olympia PS 53 CC Manual De Instrucciones

Intended Use

The automatic shredder can be used to shred paper and credit cards by inserting them in the
insertion slot� The material to be shred must comply with the requirements stipulated in Technical
Data�
The automatic shredder is not intended for shredding material which does not comply with the
requirements stipulated in the Technical Data (e�g� cardboard)� Any other use is considered
unintended use�

Before You Start

Read this operating manual through carefully, observing all the information contained
regarding handling and using the shredder� Keep the operating manual in a safe place
for future reference�
The following information should help to ensure that the shredder always functions as you expect
it to�
Never reach into the insertion slot� Before starting to shred material, remove any staples, paper
clips, rubber bands or other foreign bodies from the material concerned�
Keep all loose pieces of clothing, jewellery, long hair or other loose items away from the device�

Positioning the Shredder Safely

The shredder only operates when fit on the waste bin.
c
aution
underside of the cutting mechanism has sharp edges and corners� Do not take hold
of the shredder from the underside�
1
Mount the shredder on the waste bin� The shredder latches audibly in place�
2
Set the shredder down on a stable, level, horizontal surface and in the vicinity of an easily
accessible power socket�
3
Pay attention that the switch is set to its o
plug to an easily accessible power socket�
12
! Risk of injury through sharp edges on the cutting mechanism� The
ff position and then connect the power adapter