The vacuum source for the PCV comes already connected on your engine and must be maintained.
PCV: Connects Dry Sump Tank to Rocker Covers
Power Brake Booster Vacuum Source
The vacuum port for the Brake Booster is a plug in the Rear of the intake manifold.
Charge Air Cooler System
An intercooler pump is provided with your CP Crate Engine. In order to ensure adequate cooling the pump must be capable of
24L/min or 400 gal/hr at greater than 90 Kpa. CP p/n 13581479 meet these requirements. It is desirable to mount the pump
in a similar orientation to the picture below and below the intake manifold hose connection so that it will self-prime. The
intercooler hoses are connected to the front of the supercharger cover. The Charge Air Cooler coolant inlet is the rear connection on
the front and the outlet is the forward connection. The charger air cooler system must be plumbed according to the schematic below:
Charge Air Cooler
Coolant Outlet
Charge Air Cooler
Coolent Inlet
LS9 Crate Engine Control System
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
Fresh PCV: Connects Inlet Duct to Dry Sump Tank
Hot Coolant Out
Intercooler
Pump
Typical Charge Air Cooler Set-Up
19299465
IR 27MY16
PART NO.
DATE
LS9 Intercooler
Coolant Flow Diagram
Cold Coolant In
Intercooler Radiator
4
SHEET
REVISION
40
OF
AUTH