Wifi Connect; Remote Enable On/Off Features; Remote Enabled Equipment - Haier QVM7167 Manual Del Propietário

WiFi CONNECT

Connecting your WiFi Connect enabled microwave oven (on some models)
Your Haier Appliances microwave oven is designed to provide you with two-way communication between your appliance
and smart device.
By using the
and off your microwave, convenience features, cook time, timers using your smartphone, tablet or voice control device.
What you will need:
1. Know the password of your home WiFi router.
2. Download the Haier Appliances Kitchen App to your smart
device.
REMOTE ENABLE ON/OFF FEATURE
Remote Enable is a feature that allows you to start the
microwave from a remote source such as the Haier
Appliances Kitchen App or Voice Commands from Amazon
Alexa or Google Assistant.
When the Remote Enable feature is off, you will still receive
messages from your microwave, you can turn off the
microwave, or you can use the timer and clock from your
smart device.
REMOTE ENABLE EQUIPMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
The wireless communication equipment installed on this microwave has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to:
(a) provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and
receiver.
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician
for help.
20
Haier
Appliances WiFi Connect features, you will be able to control essential operations such as turning on
3. Follow the app on-screen instructions
to connect your Haier microwave.
For further instructions, visit:
Haierappliances.com/connect
When the Remote Enable feature is on, you need to have
opened the microwave door within the last 5 minutes. The 5
minute restriction is to help ensure food is in the microwave
before starting the cooking cycle.
To turn this feature on/off select the
Settings button on the control panel
and then press "6" to select this
feature. Press "1" for Remote Enable
On and "0" for Remote Enable Off.
(b) accept any interference received, including interference
that may cause undesired operation of the device.
NOTE: Any changes or modifications to the wireless
communication device installed on this oven that are not
expressly approved by the manufacturer could void the
user's authority to operate the equipment.
RF Exposure - This device is only authorized for use in a
mobile application. At least 20 cm of separation distance
between the transmitting antenna device and the user's
body must be maintained at all times.
Connect
Hold 3 Sec
Settings
49-2000650 Rev. 1