Panasonic ES-LV95 Instrucciones De Funcionamiento página 19

Cleaning the shaver without the self-cleaning recharger
We recommend that you clean your shaver with the self‑
cleaning recharger or the sonic vibration cleaning mode when
the faucet symbol appears on the lamp display.
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some
water to the system outer foil.
3. Rotate the lock ring [A7] to unlock
the power switch [A6].
4. Press the power switch for more
than 2 seconds to activate the sonic
vibration cleaning mode.
• The battery capacity lamps blink in
order.
• After about 20 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power
switch.
5. Remove the outer foil section [A]
and press the power switch for more
than 2 seconds to activate the sonic
vibration cleaning mode and clean it
with running water.
6. Wipe off any drops of water with a
dry cloth.
7. Dry the outer foil section and the
shaver completely.
8. Attach the outer foil section to the
shaver.
9. Lubricate the shaver.
►Drying the shaver with the self-cleaning recharger
1. Attach the outer foil section [A] to the shaver.
2. Dry the shaver with self‑cleaning recharger using "Dry/
Charge" mode.
3. Lubricate the shaver.
4
Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of
the outer foils.
5
3. Raise the trimmer and apply a
drop of oil.
4. Switch the shaver on, and run it
for approximately five seconds.
5. Switch off the shaver, and wipe off any excess oil from the
outer foils with a soft cloth.
Cleaning with the brush
►Cleaning with the long brush
Clean the system outer foil
7
(a), the shaver body (b)
and the trimmer (c) using
the long brush.
2 3
  
19