Technical Specifications - Gaggenau CMP 250 Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7
Securely insert the front line into the appliance
(snaps into place). For this purpose, put the
appliance to be plugged in just on to the edge of
the unit. Plug the power cord into the socket.
Plug transformer into dedicated receptacle in an
accessible cabinet adjacent to the coffee maker
(depends on the built-in situation). Do not plug into
a receptacle behind the appliance.
8
Push the appliance into the unit until it clicks into
place. Check that the appliance is in the middle. If
necessary, align the appliance. To do so, pull the
appliance out a little, remove the appropriate
spacers
(d)
and attach to the left side (top and
bottom). Push the appliance into the unit until it
clicks into place.
9
Take hold of the appliance door on the right next to
the outlet and open. Remove the drip tray
the cover
on the bottom left-hand side forwards
(X)
and remove. Pull out the accessories drawer
and put to one side.
10 First, secure the appliance using 2 fastening
screws
each and
(e)
Lastly, screw in the fastening screw
(h)
on the cabinet's top right.
11
Only for the expert:
In very few cases, the door of the fitted fully
automatic coffee machine can jam due to a warpage
in the cabinet where the unit is built in. The door
can be adjusted. To do this adjust the hinges at the
top and the bottom:
‒ Adjust the depth of the door by turning the
screws
(V)
.
‒ Remove the hinge dampers at the top and
bottom of the hinges. Turn the screws
adjust the inclination and the horizontal position
of the doors.
‒ Re-fit the hinge dampers.
12 Insert the cover
(X)
fastening screws
(g)
13 Replace the drip tray
and close the appliance door.
(Z)
(Y)
the 2 sleeves
as shown.
(f)
(i)
and sleeve
(e)
(W)
and fix with the two black
.
and accessories drawer
(Y)
Removal
1
Undo all screws.
2
Slightly pull out the appliance.
3
Remove the power cord from the socket.
4
Disconnect the appliance from the transformer.
5
Fully remove the appliance.

Technical specifications

. Pull
Power connection with
transformer type 8001010566
(Z)
(voltage - frequency)
Power rating
Maximum static pump pressure
Maximum water tank capacity
(without filter)
Maximum capacity of the coffee
bean container
Length of power cable
(Power socket - transformer)
Dimensions
(appliance without transformer)
H x W x D
Weight, empty
(appliance without transformer)
Type of grinding unit
to
120 V AC - 60 Hz
1600 W
19 bar
81.15 oz (2.4 l)
17.64 oz (500 g)
39" (1 m)
17.91 x 23.23 x 16.65"
(455 x 590 x 423 mm)
42 - 44 lb (19 - 20 kg)
Ceramic
11

Publicidad

Tabla de contenido
loading

Tabla de contenido