Weinmann VENTI motion BiLevel ST WM 24800 Manual De Instrucciones página 6

25 Menu switch
For switching between the standard display and the
menu.
26 Humidifier switch with LED
For setting humidifier stage. Six stages are availa-
ble. The LED indicates whether the humidifier is
activated.
27 Soft start switch
Used for activating Softstart and for setting the
Softstart time up to the maximum set by the
physician.
28 VENTIpower
Available as an accessory, to provide mains-inde-
pendent power to the VENTImotion.
Standard display during therapy:
7 Active ventilation
mode
6 Ventilation
parameters
1 Status line
This is where information about the status of the unit
is displayed, like filter change or maintenance due.
2 Soft start symbol
Indicates that soft start is activated, the number
showing time remaining in minutes.
3 Respiratory phase switch indicator
Indicates whether the current respiratory phase
switch is spontaneous or mandatory (spontaneous:
S, mandatory: T); the indicator switches from left
(inspiration) to right (expiration) depending on respi-
ratory phase; mandatory expiration is shown here.
6 EN Overview
1 Status line
5 Bar chart for pressure indication
29 Rating plate
Provides information about the unit, like serial num-
ber and year of manufacture.
30 VENTIclick
Available as an accessory, for humidifying and
heating respiratory air.
31 Carrying bag
For transporting the VENTImotion.
32 33
VENTI-O / VENTI-O
2
Available as accessories, used to deliver oxygen to
respiratory air.
2 Soft start symbol
3 Respiratory phase switch
T
indicator
4 Access to patient menu
4 Access to patient menu
The switch next to this menu item is used to switch
between the patient menu and the standard
display.
5 Bar chart for pressure indication
For graphical display of therapy pressure.
6 Ventilation parameters
The relevant current ventilation parameters are
displayed depending on the active mode.
7 Active ventilation mode
The active ventilation mode is displayed at this
point in the status line.
plus
2