Safety Instructions; General - Goobay EP6 Manual De Instrucciones

1

Safety Instructions

1.1

General

•
The user manual is part of the product and contains important
information for correct use.
•
The user manual must be available for uncertainties and pas-
sing the product.
Risk of electric shock
•
•
•
•
•
A defective device may not be put into operation, but must be
disconnected from mains and protected against further
•
•
Target group information
Not recommended for children and people with physical and / or
mentally limited capabilities.
•
•
•
•
Hot surfaces
.
The temperature of the soldering tip can reach ≥ 400 °C (752 °F)
when powered on!
•
•
Explosion hazard
•
•
Harmful vapors
During soldering harmful vapors may escape.
•
Read the user manual completely and carefully before use.
Keep this user manual.
In case of emergency, during thunderstorms and after use,
pull the product on its plug housing!
Do not open the housing.
Do not modify product and accessories.
Do not short connectors and circuits.
Use product, product parts and accessories only in perfect
condition.
In case of questions, defects, mechanical damage, trouble
and other problems, non-recoverable by the documentation,
contact your dealer or producer.
Avoid body contact with grounded parts.
Secure packaging, small parts and insulation against acci-
dental use
Do not leave the unit unsupervised while it is turned on.
Protect your eyes and body from splashing hot solder by
wearing suitable protection equipment.
Do not use the unit o heat plastic or liquids.
Do not touch during and immediately after use.
Always place the soldering iron in the holder provided after
use.
Avoid proximity to flammable surfaces and substances and
explosive materials.
Do not operate in an explosive environment.
Work only in well aired spaces or under a suitable air ex-
traction system.
use.
12