Connecting - Goobay EP6 Manual De Instrucciones

User manual
5

Connecting

Fig. 9: Connection of the soldering iron
Fig. 10: Connection of the mains plug
15
Risk of injury by stumbling and falling
• Mind placing cables in a way, nobody will be disabled and
the cable not be damaged.
• Install the system and devices attached to it in a way that
persons cannot be injured, or objects not be damaged for
example by dropping or stumbling.
Material damage due to wrong placement
• Only place on a solid, non-slipping and fireproof surface.
1. Place the stand for the soldering iron (5) to the right of the
soldering sation (8).
2. Place the soldering iron (6) in the stand.
3. Plug its cable into the socket (11) on the soldering station.
The noth in the plug must face upwards when you plug it in.
4. Tighten the retraining ring by turning clockwise.
5. Insert the mains plug (1) into a free and easily accessible
shockproof socket.