Filter Installation - Sharp UA-PG50E Operación Manual

FILTER INSTALLATION

To maintain the quality of the fi lter, it is installed in the main unit and packed in plastic
bag. Be sure to remove the fi lter from the plastic bag before using the unit.
1
Remove the Back Panel.
Upper Tabs
2
Remove the plastic bag and
take out the Filter.
Pull
E-5
Be sure to remove the power plug
from the wall outlet.
3
Place the Filter inside the main
unit.
Do not install the fi lter backwards or the
unit will not operate properly.
HEPA Filter
Deodorizing Filter
4
Replace the Back Panel to the
main unit.
Push
Push
NOTE
When replacing the fi lter, making a memo
of the start of use date is recommended.
Bottom Tabs