Preparation; Filter Installation - Sharp KC-830U Manual De Operación

PREPARATION

FILTER INSTALLATION

To maintain the quality of the fi lters they are installed in the main unit and packed
in plastic bags. Be sure to remove the fi lters from the plastic bags before using
the unit.
1 Remove the fi lters
1
Remove the Back Panel.
Pull the tab at the top of the Back Panel.
2
Remove the Deodorizing fi lter
and True HEPA fi lter from the
plastic bags.
2 Install the fi lters
1
Place the True HEPA fi lter (white) and Deodorizing fi lter
(black) within the main unit.
Do not install the True HEPA fi lter backwards
or the unit will not operate properly.
2
Replace the Back Panel to the main unit.
3
Fill in the usage start date and
place on the unit as guide for when
the fi lters should be replaced.
Be sure to remove the power plug from the wall outlet.
Deodorizing fi lter (black)
Date Label
E-10
Tab
True HEPA fi lter (white)