Top Panel Overview; Function Buttons - Numark HDMIX Manual De Inicio Rápido

TOP PANEL OVERVIEW

17 17
13 13
16 16
21 21 22 22
20 20
12 12
11 11
25 25
26 26
26 26
27 27
28 28
28 28
29 29
31 31
31 31
1. POWER BUTTON – Press to power on. To power
off, press and hold for two seconds.
2. LCD SCREEN – Split into three sections: Deck A and
B sections are shown in the top left and top right.
Menus and content information are displayed
underneath.
3. PUSH SELECT – This knob is used to navigate
Library lists and menus on the LCD. Twisting scrolls
through menus; pushing enters submenus.
4. LIBRARY – Main menu. Switch between connected
USB devices via function keys or by pressing F10 on
the keyboard. Browse your music library via Tracks,
Artists, Albums etc. Playlists can be created on the
HDMIX or imported from disk. Navigate disk content
directly by selecting the Files menu item.
5. CRATE – The central workspace for your set. Add
tracks or albums 'to Crate', then press the CRATE
BUTTON. To change the running order: Press PUSH
SELECT to pick up, twist to reorder, push again to
drop. Pull tracks off the decks to save for later.
Remove one or clear all of the tracks. Your Crate can
accept tracks from all connected USB drives.
6. UTILITY – System preferences can be set, including
display brightness, pitch slider calibration and
settings restoration. Check here that the software
version is up to date.
7. VIEW – See track information and visual profiles. To
create profiles, use the Librarian software which can
be found on the HDMIX hard-drive (also available
from http://www.numark.com).
19 19
4
14 14
23 23
5
15 15
8
18 18
10 10
29 29 26 26 28 28
27 27
30 30
30 30
28 28
32 32
31 31
2
9 9 9 9
29 29
33 33
33 33
35 35
30 30
34 34
8. < and > PAGE BUTTONS – These two buttons can
access extra functions when available; shown by
arrow pointers appearing in the lower corners of the
screen.
9. FUNCTION BUTTONS – These four buttons select
the available menu options displayed above them.
Depending on the menu that you are viewing, the
functionality of these buttons will change. Use them
to load tracks for playback: With a track highlighted,
choose a side (or deck) to play on, then load either
'to A' or 'to B' using these buttons.
10. PLAY/STUTTER – Starts the music loaded on the
corresponding deck. Press this button again while the
music is playing to jump back to the last set cue
point, creating a 'stutter' effect.
11. PAUSE – Pauses playback. Press and hold the
PAUSE button for one second while paused to return
to the beginning of the track.
12. CUE – Returns to the last set cue point (defaults to
start) and pauses. The cue point is set at the position
where PLAY/STUTTER is pressed. Audition by
pressing and holding down the CUE button while
paused at the cue point. Edit the cue point by
spinning the JOG WHEEL to a new position while
paused, then pressing PLAY.
5
3
13 13
24 24
6 14 14
21 21
22 22
15 15
7
8
18 18
12 12
11 11
26 26 38 38
27 27 37 37
36 36
28 28
39 39
31 31
1
17 17
16 16
23 23
20 20
10 10
43 43
41 41
40 40
42 42