Changing The Oil - Craftsman CTX 9000 Manual Del Operador

Ocultar thumbs Ver también para CTX 9000:
Tabla de contenido

Publicidad

E
D
F

Changing the Oil

Used oil is a hazardous waste product and must be
disposed of properly. Do not discard with household
waste. Check with your local authorities, service center,
or dealer for safe disposal/recycling facilities.
Remove Oil
1. With engine off but still warm, disconnect the spark
plug wire (A, Figure 13) and keep it away from the
spark plug.
2. Remove the dipstick (D).
20
D
B
Standard Oil Drain Plug
1. Remove the oil drain plug (B, Figure 13). Drain the oil
2. After the oil has drained, install and tighten the oil
Optional Quick Oil Drain
1. Disconnect the oil drain hose (G, Figure 13) from the
2. Turn and remove the oil drain cap (H). Carefully lower
3. After the oil has drained, install the oil drain cap. At-
G
into an approved container.
drain plug.
side of the engine.
the quick oil drain (I) into an approved container (J).
tach the oil drain hose to the side of the engine.
A
H
J
Figure 13
I

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

107.250040

Tabla de contenido