Before The First Use - Domo DO908DV/02 Manual De Instrucciones

PARTS
1. Housing
2. Removable wire shelf
3. Thermostat knob (at the back)
4. Adjustable legs
5. Cover for door hinge
6. Door
7. Temperature sensor

BEFORE THE FIRST USE

· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and the
inside with a wet, lukewarm cloth.
· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
· Avoid very moist places.
· Before connecting your refrigerator to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. A different voltage could damage the
appliance.
· Make sure that you have access to the plug of the appliance.
· Make sure that the air can circulate around the freezer.
· For uneven surfaces, front feet can be aligned.
· Allow the appliance to stand for 24 hours before turning it on. This allows the cooling agent to settle.
· After installation, let the freezer turned on for 12 hours before using it. This way the desired
temperature can be reached.
· The climate class indicates the minimum and maximum ambient temperature for the proper operation
of an appliance. You can find the climate class on the type plate on the back of the appliance.
www.domo-elektro.be
1
2
3
4
16
5
7
6
DO908DV/02
29