Axis Ip Utility - Single Camera/Small Installation - Axis P85 Serie Guia De Instalacion

AXIS P85 Network Camera Series

AXIS IP Utility - single camera/small installation

AXIS IP Utility
automatically discovers and
displays Axis devices on
your network. You can also
manually set a static IP
address through this
application. AXIS IP Utility
can be downloaded from
Note that you must install the network camera on the same network
segment (physical subnet) as the computer running AXIS IP Utility.
Automatic discovery
1. Check that the network camera is connected to the network and
that power has been applied.
2. Start AXIS IP Utility.
3. When the camera appears in the window, double-click it to open its
home page.
4. See page 11 for instructions on how to assign the password.
Assign the IP address manually (optional)
1. Acquire an unused IP address on the same network segment as your
computer.
2. Select AXIS P8513/AXIS P8514 in the list.
3. Click the button
enter the IP address.
Click the Assign button and follow the instructions.
4.
Click the Home Page button to access the camera's web pages.
5.
6. See page 11 for instructions on how to set the password.
Assign new IP address to selected device and
Page 9