Clarion BLT 370 Manual De Instalación página 19

5. OPERATIONS FOR BLUETOOTH
PHONE TRANSCEIVER UNIT
Turning on/off multiple re-connection mode
This function allows user to switch on or off the multiple re-connection mode.
ON: Multiple attempts are made to auto re-connect with the last paired mobile
OFF: Only 1 attempt is made to auto re-connect with the last paired mobile
1. When the Transceiver is powered on (no device connected), press and hold
the [ VOL + ] and [ VOL - ] buttons simultaneously for 2 seconds or longer to
toggle multiple re-connection mode on or off.
2. Auto connection will be observed in the next powered up of the Transceiver
based on the multiple re-connection mode setting.
Notes:
• Factory default setting is ON.
• Please refer to chapter "Understanding the Transceiver Unit Indicators" on
page 15 for more information about the LED status.
• The multiple re-connection attempts will be terminated if the Transmitter (DGL370)
is connected.
• Resetting the Transceiver will not change the multiple re-connection mode to
original setting.
1EN_OM_Receiver BLT370.indd 17
phone (HSP/HFP) when Transceiver is powered up.
phone (HSP/HFP) when Transceiver is powered up.
AUDIO/MOBILE-
®
BLT370
17
4/5/07 2:14:34 PM