Installing The Overhead Gearloft™ Storage Rack; Storage Rack Care; Registering Your Product - Gladiator GEARLOFT GALS24M1KG Instrucciones De Ensamblaje

Installing the Overhead GearLoft™ Storage Rack
1.
Attach the EZ Connect supports
Using two or more people, the rack system can be easily lifted
and positioned overhead. The EZ Connect feature allows for
positioning 23" to 37.8" from the ceiling. Lift the rack into place
and connect the lower supports to the upper supports. Make sure
the rack supports are facing the same way and the rack is level.
Wash storage rack with a mild liquid detergent and warm water using a soft, clean cloth.
■
Check fastener tightness annually.
■
There are many benefits of registering your product. Find out more and register your product online at
www.gladiatorgarageworks.com. In the USA, call 1-866-342-4089. Consumers in Canada can call 1-800-807-6777.
WARNING
Excessive Weight Hazard
Use two or more people to move storage rack.
Failure to do so can result in back or other injury.

Storage Rack Care

Registering Your Product

2.
Complete the assembly
P2
P5
P6
Make sure all bolts and screws are tight. Once the rack is in the
desired location below the ceiling, place an EZ Connect locking
pin (F5) in a hole on each of the corner and center supports to
lock/retain them together. The pins go through both upper and
lower supports.
NOTE: The rack system can be repositioned up or down by
removing all locking pins and relocating the EZ Connect position
on the supports. Use two or more people to relocate the rack and
replace the EZ Connect locking pins (F5).
F5
F5
EZ Connect locking pin
11