5. Maintenance
5.1 Replace Battery
Warning
TO AVOID ELECTRICAL SHOCK, REMOVE TEST
LEADS BEFORE OPENING BATTERY COVER.
1) When the battery indicator "
" appears, the battery should be
replaced immediately.
2) Unscrew the fastening screw of the meter battery cover and remove it .
3) Replace battery.
4) Put the battery cover back as before.
Note:
Do not reverse battery polarity.
5.2 Replace Probe
Warning
When replacing probe, replace with another
identical probe or one with the same
specifications. The probe should be in good
condition. Probe level: 1000V, 10A.
If the probe is damaged, such as a bare metal wire, replace the probe.
Pg 24