Safety Information; Preparation - CPS AC750 Manual De Instrucciones

1. Safety Information

Please particularly note that inappropriate use may cause
shock or damage to the meter when using. When using
the meter, comply with common safety procedures and
completely follow the safety measures stated in the operation
manual. In order to make full use of the meter's functions
and ensure safe operation, please carefully read and follow
the procedures in the operation manual.
This meter meets to UL/CAS61010-1 with Measurement category
(CAT lV 600V and CAT III 1000V.) and pollution degrees follow the
safety guidelines to ensure safe usage of the meter. Protection
provided by the instrument will be impaired if used in a manner not
specified by the manufacturer. The meter will provide satisfactory
services to you if you use and protect it appropriately.

1.1 Preparation

1.1.1 When using the meter, the user should comply with standard
safety rules for:
- General shock protection
- Proper use of the meter
1.1.2 Please check for damage caused during transportation after
receiving the meter.
1.1.3 If the meter is stored and shipped under hard conditions,
please confirm that the meter operates properly or is damaged.
1.1.4 Probe should be in good condition. Before use, please check
whether the probe insulation is damaged and whether the
metal wire is bare.
1.1.5 Use the probe provided with the meter to ensure safety.
If necessary, replaced the probe with another identical probe or
one with the same specification.
Pg 01