Advertencias - SUEZ Sievers 500 RLe Manual De Operación Y Mantenimiento

Advertencias

E
NGLISH
This is a Safety Class I product. It must be attached to a grounded power source. To avoid
damage to the Analyzer and the chance of injury, make sure the Analyzer is connected to a
power line of the proper voltage.
Any operation requiring access to the inside of the Analyzer, including installation of
maintenance items, could result in injury. To avoid potentially dangerous shock, turn off power
and disconnect from the power supply before opening the Analyzer.
SUEZ © 2018
This symbol on the instrument indicates that the user should refer to the manual
for operating instructions.
The vial port contains sharp needles designed to pierce the septa of sample
vials. Do not put fingers or inappropriate materials into the vial port.
Water in the iOS System may be hot. Before inserting a vial into the iOS System,
slide the door open and wait 30 seconds to allow sample to completely drain.
Inserting a vial before draining can result in potentially hot water spray projecting
upward out of the iOS System.
This symbol indicates the protective earth terminal (ground) for the Analyzer.
This symbol indicates that to comply with European Union Directive 2002/96/EC
for waste electrical and electronic equipment (WEEE), the Analyzer should be
disposed of separately from standard waste.
This symbol on the instrument indicates that the user should refer to the manual
for instructions on filling the DI water cartridge, as found in the Installation and
Maintenance chapters.
Warnings
17 / 162 DLM 74300-05 ES Rev. A