Important - DeVilbiss GTi Serie Manual De Operación

E
E
Operation Manual
GTi – Gravity Feed Spraygun
Read and follow all instructions and Safety Precautions before using
The GTi Gravity Feed Spraygun Kit is approved to ATEX regulations 94/9/EC,
II 2 G, Suitable for use in Zones 1 and 2
protection level;
Important: These Sprayguns are suitable for use with both waterbased and
solvent based coating materials. The design uses EPA compliant atomising
(Devilbiss Trans-Tech®) technology to reduce overspray and improve coating
efficiency. Nozzles and Needles are manufactured in Stainless Steel. These guns
are not designed for use with highly corrosive and/or abrasive materials and if used
with such materials it must be expected that the need for cleaning and/or
replacement of parts will be increased. If there is any doubt regarding the suitability
of a specific material contact your local Distributor or ITW Finishing direct.
Example:
Aircap Number
Gunbody colour
B = blue; m = multicolour
EC Declaration of Conformity
We: ITW Finishing UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the manufacturer
of the Spraygun model JGA, declare, under our sole responsibility, that the equipment to which this
document relates is in conformity with the following standards or other normative documents:
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the
protection requirements of Council Directive 89/392/EEC relating to Machinery Safety Directive, and;
EN 13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective
Systems intended for use in Potentially Explosive Atmospheres protection level II 2 G.
This product also complies with the requirements of the EPA guidelines, PG6/34. Transfer
efficiency certificates are available on request.
ITW Finishing Systems and Products reserve the right to modify equipment specification without prior notice.
© 2003 ITW Finishing Systems and Products

Important

this equipment
Description
Model Part Number
GTI-G110B-14
Nozzle size
B. Holt, General Manager
2
30th June 2003