Measuring Temperature - Facom NU-712/1200 Guía De Instrucciones

Measuring AC or DC Currents (Ammeter)
Set the selector switch to the ammeter function A.
Open the jaws of the alligator clip with the spring catch and insert it on the conductor where the
measurement is to be made.
Release the spring catch and make sure the jaws are in good contact to reclose the magnetic
circuit correctly.
Range switching and AC/DC selection are automatic.
In DC, the residual or zero current may be corrected by pressing and holding the
In DC current, the maximum current is 400 A.
In A DC, the display indicates :
In A AC, the display indicates :
Display Range
Measurement 0,20 - 39,99 A
Range
Precision 1,5% ± 10 points
Resolution 10 mA

Measuring Temperature

Without probe
The displayed temperature measurement is that of the tester,
equivalent to the ambient temperature after thermal stabilization.
The T° INT symbols appear on the display.
HOLD
___
above + 399,9 A
OL
___ below - 399,9 A
OL
above 600 A peak.
OL
A A
40,0 - 399,9 A 400 - 600 A peak
1,5% ± 2 points 1,5% ± 2 points
0,1 A 1 A
button.
A
19