Human Touch OPUS Manual De Uso Y Cuidado página 6

take control
Front
Auto Massage Programs –
Four unique auto programs
automatically massage you for 15
minutes, using a variety of massage
modes. The corresponding LED
lights to indicate which massage
mode is currently in use.
After selecting an auto massage
program, the massage mechanism
automatically detects your shoulder
location to determine your vertical
massage range. You can override
this setting use the Range button
on the side of the remote.
Posture — Adjust the chair
to a comfortable position.
Calf — Press to toggle
through two fixed calf
massage speeds and an
auto massage program.
humantouch.com
Targeted Muscle Benefits — Four
massage modes let you customize
your massage. (See page 10)
Intensity 3D — Set the upper
and lower back 3D massage
intensity independently to soft
(I), medium (II), or intense (III).
Go to Zero (One-step press
and hold) — Fully reclines
the backrest and raises the
footrest, placing your body in a
neutral-posture position.
Bodymap PRO
(See page 11)
Foot — Press to toggle
through two fixed foot
massage speeds and an
auto massage program.
8
Now choose a massage technique. Your Human Touch massage chair lets you customize
your massage using a wide variety of massage modes. Choose from three stationary
massage modes and a rolling massage, or combine them. Use the Range button to tailor
your vertical massage range, or the Zone and Position buttons to target your massage
to a specific area. Or, let the chair take control—just select one of the four auto massage
programs, which alternate massage modes to achieve four unique experiences. And don't
forget the soothing warm-air heat! No matter how you use it, Human Touch Technology
offers maximum massage flexibility and refreshing benefits.
Side
Range — Choose from seven
settings to personalize your vertical
massage range.
Width — Focus or diffuse massage
pressure by selecting the wide,
medium, or narrow setting. This feature
works with Flex and Ease massage
modes. Select the width setting after
selecting a massage mode.
Back Warm Air — Activates the warm air
lumbar heat. NOTE: After deactivating
the heat, the LED turns off but the fan
continues to run to cool down the heater.
This is normal.
Vibration — Activates the foot
vibration.
Stop/Restore — Press and release to stop
the massage and return the massage
mechanism to the top of the backrest.
Press and hold to lower the footrest and
raise the backrest to the upright position.
Zone — Targets your massage to
a six-inch zone. Use the Position
buttons to focus your massage on
the desired area.
Position — Use this button along with any
stationary massage mode, to set the
massage head to the desired position on the
backrest. You can press this button before or
after selecting the massage mode.
Activatest the shoulder, arm,
and seat air massage.
When you're not using the remote, store it
in the convenient pocket on the left side of
the chair, so it's out of the way.
9