Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
cates that it is sending RF and IR to the TV. If the signals are in Red, it means that the
remote is transmitting IR only.
SETTING UP MARMITEK X-10
Setting Up the EASYICON10RF to operate the TM13 Transceiver using Housecode "B."
The TM13 Transceiver receives RF signals to control lights and appliances. Do the follow-
ing to setup this transceiver.
•
Press the HOME key to display the setup screen. Select Setup.
•
Select X-10.
•
Select Add/Edit at the next screen.
•
Choose the room where you will locate the TM13. For this example choose
Basement.
•
Press the Side Key to select.
•
At the add an X-10 device screen, press OK.
•
Select Pick Device.
•
Select Appliances and then scroll until you see the TM13 icon.
Select TM13 using the appropriate Side Key.
•
At the following screen select Address.
•
Using the Side Keys, select "B."
•
Select Save using the Side Key.
Note: The values in the Address screen must match the physical hardware settings for
the Marmitek X-10 device. In this example, the settings were set to B. This means that
B matches the physical settings for the TM13.
•
Use the appropriate Side Keys to create a Label. The Label feature can have two
lines of labels. The example on the right shows a Bath as an "Extra Bath." You enter
each line of the label by pressing the Side Key for the line number, for example, 1 or
2, and then entering the label using the alphanumeric keys as shown.
•
Select Save to save the Label(s).
•
Using the Side Keys, Pick Logo and select an appropriate logo (for example, the
bathtub logo on screen 10 of 21).
•
Select Save using the Side Key.
•
Select Done using the Side Key.
•
The Saving Settings screen appears.
USING MARMITEK X-10 FEATURES
After you've set up an Marmitek X-10 module, like the TM13 in the previous example,
follow these steps to use the device.
•
Press the Mode key to display the various components.
•
Select X-10 using the Side Key.
•
Select the room that has the Marmitek X-10 device. (In the previous example it was
EASY ICON 10 RF™
11
Publicidad
Tabla de contenido
