Lime Removing Feature (Self-Clean); Transport Lock; Storage - Beko SGA7126P Manual De Usuario

4 Cleaning and care
4. Slightly press and release to replace the
cartridge.
5. Remove the new cartridge from its package,
soak it in the water for 5 minutes and push it in
its slot.
4.3 Lime removing feature
(Self-Clean)
1. When the " " lime removing (self-clean)
symbol flashes on the control panel, (10) this
means that it is time for lime removing.
2. Fill the water reservoir (5) (see 3.6). v
3. Plug in the appliance.
4. Hold and press the control button (11) and
steam trigger (12) together for 3 seconds.
The "
C
blink on the control panel (10) when
the appliance switches to lime
removing (self-clean) mode.
5. Then press the control button (11) once.
– " " symbol will flash on the control panel
(10) permanently.
6. Keep the appliance over the sink horizontally
and shake it while pressing and holding the
steam trigger (12).
Steam Station / User Manual
" symbol will constantly
7. When the lime removing (self-clean) is over, the
appliance automatically returns to the mode
before the lime removing process.

4.4 Transport lock

1. Turn the transport lock (9) in order to be able to
move/transport your appliance easily and store
it securely.
2. Turn the lock again to unlock the transport lock.

4.5 Storage

• If you do not intend to use the appliance for a
long time, store it carefully.
• Unplug the appliance and wait for it to cool
completely before storing it.
• Discharge the water in the water reservoir (5).
• Wrap the cable around the cable winding slot
with bracket (3) and fix it in order to store the
steam station.
• Store it in a cool and dry place.
• Keep the appliance out of the reach of children.
11 / 104 EN