Grundig MS 6240 Manual Del Usuario página 21

CLEANING AND CARE __________________
Caution
The foils can be irreparably dam-
■
aged during cleaning. Only press
very gently.
5
Attach all parts again after clean-
ing.
Caution
To ensure smooth operation, the
■
foil frame must be properly seated
in the housing. Never take the foils
out of the frame.
Replacing the foil frame
and blade blocks
You can replace the foil frame and
blade blocks. The appropriate re-
placement shaving system (contain-
ing two blade blocks and one foil
frame) is article number MSR 72. Ask
your specialist dealer about it.
Replacing the foil frame
1
Remove the foil frame. To do so,
push the side lock buttons
2
Fix the new foil frame in the hous-
ing.
Caution
Ensure that the foil frame is firmly
■
in position and cannot move within
the housing.
Replacing the blade
blocks
1 Remove the blade blocks
pulling them upwards off the oscil-
lator
2
Place the new blade blocks on the
oscillator.
Caution
Ensure that the blade blocks are
■
firmly in position on the holder.
Note
For an optimum shaving experi-
■
ence, always replace foil frame
and blade blocks at the same time.
Storage
If you do not plan to use the appli-
ance for a long period of time, please
store it carefully.
Make sure that it is unplugged and is
completely dry.
Store the appliance in the original
storage bag in a cool and dry place.
Make sure the appliance is kept out
.
B
of the reach of children.
.
H
ENGLISH
by
G
21